A balanced approach!



AeroWash is a concentrated preparation for removing grease, oil, dirt and hydrocarbon based material from Aircraft surfaces. The product has been formulated to cut quickly through the toughest dirt, oil and hydrocarbons on account of the wetting, penetrating, soil cutting and anti-redepositing properties of the surfactant system.

Biodegradable.pngThe surfactants contained in this preparation comply with the biodegradability criteria as laid down in Regulation (EC) 648/2004 on detergents.


  • Easily removes heavy oil and dirt deposits.
  • Easy bug splatter removal.
  • Effective removal of de-icing stains.


Boeing D6-17487 Revision T, Airbus AIMS09-00-002

Usage instructions

  1. Dilute product appropriately, see below.
  2. Spray on paying particular attention to stubborn areas and allow time to clean. Agitate if possible.
  3. Wipe off with a clean towel.

Can be used as a foam cleaner with suitable foam generation equipment.

Dilution Rates Drywash / Wetwash

  • Main fuselage and above wings 20 parts water : 1 part AeroWash.
  • Under belly, under wings, landing gear 10 parts water : 1 part AeroWash
  • Extremely dirty areas 5 parts water : 1 part AeroWash


An effective, concentrated enzymatic preparation for breaking down protein-based deposits at source, thereby removing organic stains and reducing associated unpleasant malodors. The product can be used neat as a prespotter and diluted 1:10 for general stain removal and soft fabric cleaning. AeroFab combines biodegradable surfactants for effective cleaning and is suitable for use on most surfaces. It is effective for use on protein based spills such as urine, vomit, faeces, sweat, grass and food spills such as milk, wine, sauces, gravy, egg etc.

Biodegradable.pngAeroFab is readily biodegradable and non-flammable. The surfactants contained in this preparation comply with the biodegradability criteria as laid down in Regulation (EC) 648/2004 on detergents. In addition, the enzymes are biodegradable and friendly to the environment.



Usage instructions

AeroFab is supplied in concentrated format and should be applied neat over the affected area for pre-spotting and diluted 1:10 for general cleaning of soft furnishing and carpets etc.

Use a microfiber cloth to agitate gently and help lift the stain. No need to rinse surfaces following application.

Test for colour fastness on a small area first.

Application Areas

Curtains, seats, cushions, rugs, carpets etc.





Aeroglas for Textile is the worlds first aerospace-approved nano coating for aircraft carpets and fabrics. There are many products out there which are jumping on the Nano buzz-word bandwagon but most are the kind of product you would coat your sofas with at home and certainly are not a true nano product! We're delighted to be the first to offer a true nano-technology product approved for use in the aerospace industry, which has already exceeded expectations in both lab testing and testing conducted by us and our customers on live aircraft.

Ultra thin (150 NM400 times thinner than a human hair) pure Glass (SiO2) coating with anti - microbial (DIN ENISO 10993 1-12) coating, long lasting (up to 10 years).The coating is olio phobic (repels oil) and hydrophobic (repels water), flexible (200%) and resists acids, alkali and solvents. The anti-microbial property of the coating reduces cabin odours.


  • Extremely easy to apply.
  • Long lasting.
  • Once applied, the removal of spills is extremely easy.
  • Staining is reduced considerably (almost eliminated).
  • Reduces bacteria, which reduces odour.
  • FAA and EASA Burn Test approved.
  • Improves the effectiveness of regular cleaning, as dirt and stains are easier to remove.


  • FAR / EASA CS 25-853 Appendix F Part 1
  • DIN EN ISO 10993 1-12


 Untreated carpet - the liquid soaks in immediately

Carpet treated with Aeroglas for Textile  the liquidsits on-top of the fabric, allowing for time to remove it before it soaks in and stains